ANALISIS KESESUAIAN METODE PELAKSANAAN PENGECORAN PELAT LANTAI PADA PROYEK PEMBANGUNAN HOTEL ASTON INN LUMAJANG DENGAN SNI 2847 : 2019
Article Sidebar
Main Article Content
Abstract
The implementation of slab casting is a crucial stage in high-rise building construction, as it plays a role in distributing gravitational loads to other structural elements, such as beams and columns. This study aims to analyze the conformity of the slab casting method in the Hotel Aston Inn Lumajang construction project with the standards of SNI 2847:2019, specifically Article 26.5.2.1 on concrete casting and compaction, Article 26.5.3.1 on concrete curing, and Article 26.11.1.2 on formwork standards. Data was obtained through literature review and direct observation of the slab casting process for the 7th floor in Zone 3.The casting process was carried out systematically, including preparation, formwork installation, reinforcement, supervision checks, area cleaning, casting, concrete curing, and formwork removal. Each stage complied with SNI 2847:2019 standards, including area cleanliness (point a), the use of casting equipment (points d and e), continuous casting and concrete compaction (points i and j), concrete curing to maintain moisture for 28 days (point a of Article 26.5.3.1), and the use of 12mm plywood formwork that meets the standards in Article 26.11.1.2 point a on formwork standards.The analysis results indicate that the slab casting method in this project complies with the SNI 2847:2019 standards in terms of procedures, material quality, equipment usage, and field implementation.
Article Details
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
References
Arjuna, A., Jasman, J., & Muis B, A. (2024). Pengaruh Rendaman Air Laut, Air Hujan, Dan Air Payau Terhadap Kuat Tekan Beton. Bearing : Jurnal Penelitian Dan Kajian Teknik Sipil, 9(1), 10. https://doi.org/10.32502/jbearing.v9i1.7854
Badan Standardisasi Nasional. (2019). Persyaratan Beton Struktural untuk Bangunan Gedung. Sni 2847-2019, 8, 720.
Chujaimah, S., & Herlina, H. (2022). Faktor-Faktor yang Mempengaruhi Perilaku Penggunaan Scaffolding di Proyek Gedung Kereta Api PT Istaka-Mina KSO. Jurnal Persada Husada Indonesia, 9(35), 31–40. https://doi.org/10.56014/jphi.v9i35.354
Jumari, J., Endayanti, M., Siburian, J., & ... (2024). Analisa Penerapan Keselamatan Dan Kesehatan Kerja (K3) Pada Proyek Konstruksi Dinding Penahan Tanah. Jurnal Darma …, April, 753–769. http://jurnal.darmaagung.ac.id/index.php/jurnaluda/article/view/4263
Kumendong, J. G., Arsjad, T. T., & Walangitan, D. R. O. (2024). Metode Pelaksanaan Konstruksi Pekerjaan Beton Pada ProyekPembangunan Rumah Dinas Kejari Kotamobagu. Jurnal Tekno, 22(87), 125–134. https://ejournal.unsrat.ac.id/v3/index.php/tekno
Moruk, L. F., Indra, H. S., & Priskasari, E. (2019). Studi Perencanaan Struktur Baja Dengan Menggunakan Breising Konsentris Tipe X Pada Gedung Fakultas Ilmu Keolahragaan Universitas Negeri Malang. Sondir, 2, 20–24.
Oroh, N. E., Tjakra, J., & Mangare, J. B. (2024). Analisis Efisiensi Penggunaan Sengkang Besi Beton. 22(87).
Paryati, N., Nuryati, S., Yulius, E., & Agussalim, A. M. (2024). Analisis Hasil Kuat Tekan Beton Normal Terhadap Mix Design Kuat Tekan Beton Rencana. Jurnal Kridatama Sains Dan Teknologi, 6(02), 415–429. https://doi.org/10.53863/kst.v6i02.1244
Putra, A. T., Riskijah, S. S., & Naibaho, A. (2024). Analisis Penggunaan Bekisting Pada Proyek Apartemen a Surabaya. 5, 333–340.
Sual, G., Arsjad, T. T., & Dundu, A. K. T. (2020). Metode Pelaksanaan Konstruksi Pengecoran Plat Lantai Pada Proyek Pembangunan Luwansa Hotel and Provinsi Sulawesi Utara. Jurnal Sipil Statik, 8(6), 943–946.